65
Therefore, it denotes the user is granted privileges of I/O access, Camera control
and Listen.
View Parameters
The View Parameters function can be found under this path:
System > View
Parameter.
Click on this item to view the entire system’s parameter setting.
Factory Default
The Factory Default setting can be found under this path:
System > Factory Default
.
Users can follow the instructions on this page to reset the IP Camera to factory
default settings if needed.
Set Default
Click on the
Set Default Button
to recall the factory default settings. Then the
system will restart in 30 seconds.
Note:
The IP address will be restored to default.
Reboot
Click on the
Reboot Button
, and the system will restart without changing current
settings.
Software Version
The Software Version can be found under this path:
System > Software Version
.
The current software version is displayed in the software version page.
Software Upgrade
The Software Upgrade setting can be found under this path:
System > Software
Upgrade
.
Note:
Make sure the upgrade software file is available before carrying out
software upgrade.
The procedure of software upgrade is as below:
Summary of Contents for CAM6181
Page 1: ...1 Speed Dome IP Camera Series User Manual Release 1 2...
Page 10: ...10 Internet Security Level Default 86 ActiveX Controls and Plug ins Settings 86...
Page 20: ...20 2 2 Dimensions Unit mm inches...
Page 87: ...87 Close the browser window and restart a new one later for accessing the camera...