Surveon CAM4210
Adding/Editing a Scheduled Rule
The Add and Edit screens contain the following actions:
Note:
If editing a rule that has not been triggered, the rule will not be
triggered after until after editing is complete. If the rule is triggered,
any changes will not be applied until the current trigger is resolved.
General
The following general fields should be filled in:
•
Name - Specifies the name of the Event.
•
Set Time Interval (When Activated) - The trigger time of the event
(00:00 to 23:59).
Enable Triggering By
The next step is to specify the frequency of trigger response. 3 options are available:
•
Always - The default setting; Triggers event when conditions are met.
•
Recurrence Pattern - Enables triggering only if conditions are met during a
specified time period.
To specify the period, select the days of the
week that the trigger is active by checking the corresponding boxes,
and fill in a start time and end time for motion detection in the From:
and To: boxes.
•
Never – The event is never triggered.
49
Surveon Network Camera User Manual
