Surveon CAM4210
Port Settings
Ports are a software construct used to multiplex the transmission information
to and from the camera. They act as separate endpoints within an IP address
where software "listens" for incoming information. This section, which can be
accessed under Network> Port Settings, includes HTTP Port Settings and
RTSP Settings.
Note:
The default port numbers in this section are, for the most part, well-
known or commonly known values. We recommend that they not be
changed unless there is a specific reason to do so.
HTTP Port Settings
The HTTP port number is used access the camera via the HTTP protocol.
The LiveView Port number is used to transmit live-view information.
RTSP Settings
Real-Time Streaming Protocol (RTSP) is a protocol used to
establish and
control media sessions between end points.
You may change the access name for stream 1, stream 2, the RTSP port
number, the RTP port for video, the RTCP port for video, RTP port for audio,
and RTCP port for audio.
Note:
The RTP port number must be an even number. After entering the
RTP port number, the RTCP port number will automatically be set to
the RTP port 1.
Click OK to save or Cancel to abort the changes before you leave the page.
25
Surveon Network Camera User Manual
