23672 9/18 | 85-000821_INST_A
6400 West 105th Street, Bloomington, MN 55438
P
877.743.3191
E
W
surlybikes.com
Installation
• With the gripped side facing down, place the Deck Pad on top of your Dummy Deck (Fig. 3).
• Thread the webbing straps of the Deck Pad between the Dummy Rails and the Dummy Deck (Fig. 4).
• Thread the end of each strap through the buckle and cinch it tight.
• Secure excess strap through the elastic band.
Ongoing Maintenance
Spot clean with mild soap and warm water when required if you’re prone to riding in wet conditions. If Deck Pads are wet
or damp, remove from deck and allow to air dry completely before storing.
CLEANING:
Remove covers and spot clean with warm water and mild soap. Do not use detergent, bleach, or other harsh chemicals.
Air dry covers and pads completely before installation.
Seat pad install
Added arrows in (red) but please tweak / stylize.
Figure 4
Top of Deck Pad
Bottom of Deck Pad
Figure 3
