Chapter 3: Setting Up the Monitor
3-2
Operation Manual SurgiVet V3395
ALARMS
Set SpO
2
High and Low Alarms
Set Pulse Rate High and Low Alarms
Set Respiration Rate High and Low Alarms
VOLUME
Adjust Alarm Volume
Adjust Pulse Volume
OXIMETER
Select Averaging Parameters
Disable/Enable Oximeter Function
RESPIRATION
Sensitivity Setting
Enable/Disable Respiration Function
TEMPERATURE
Units
Enable/Disable Temperature Function
TRENDS
Select Display Time
Select Trend Display Scales for Each Parameter
Clear Trend Memory
PRINTER
Start/Stop Serial Output
Select Data Format
Select Printer Type
FIGURE 3.2: MENU STRUCTURE
The operator chooses various monitor settings through menus that appear in the waveform
area. The
b
key and
ARROW
keys
(
)
are used to select menu items and change
settings.
1. To show the Main menu: Press the
b
key. Menus replace any waveforms displayed.
2. To select a menu item: Press the ARROW keys
(
)
until the selector arrow points
to the desired item, then press
b
. This will either take you to a new menu or allow the
selected item to be adjusted.
3. To change a setting for a selected menu item: After pressing
b
as in step 2, the item,
which can be changed, will be highlighted. Use the ARROW keys
(
)
to select the
desired setting, then press
b
to accept that setting.
4. To exit the current menu: Select the [EXIT] menu item
5. To exit all menus quickly and return to the previous monitoring screen: Press
a
.
NOTE: If menus are shown and you do not press menu keys for 20 seconds, the
waveform display will return, and any current menu selections will be accepted.
