© SurgeX | Technical Support: 800-645-9721 | surgex.com
Page 23
On-Line UPS
User Manual
Models: UPS-1500-OL, UPS-2000-OL, UPS-3000-OL
SX-BDL-1500, SX-BDL-2000
Self Test Operation
Please refer to the three operating buttons on the front panel of the UPS.
•
Confirm the UPS is in “Utility Mode”.
•
Press and hold the “Function” button for a minimum of two seconds.
The self-test will last for 10 seconds, during this time the LED’s will be lit in a sequential, repeating fashion
Audible Alarm silence in DC Mode or Fault Mode
•
When the UPS is in DC Mode, the audible alarm will sound every four (4) seconds. Press and hold the
“Function” Button for a minimum of two (2) seconds to disable the audible alarm.
•
When the UPS is in Fault Mode, the audible alarm will continuously sound. Press and hold the
“Function” Button for a minimum of two (2) seconds to disable the audible alarm.
11. Batteries
REPLACING THE BATTERY (Qualified Service Personnel Only)
CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery. Service
the battery under the supervision of Qualified Service Personnel knowledgeable of batteries and their
precautions.
CAUTION! Use only the specified type of battery. See your dealer for replacement batteries.
CAUTION! The battery may present risk of electrical shock. Do not dispose of batteries in a fire as it may
explode. Follow all local ordinances regarding proper disposal of batteries.
CAUTION! Do not open or mutilate the batteries. Released electrolyte is harmful to skin and eyes and may be
toxic.
CAUTION! Although the battery system voltage is only 12VDC and 24VDC, the battery can present a high risk
of short circuit current and electrical shock. The short circuit current capability of the battery is sufficient to burn
wire or tools very rapidly, producing molten metal. Observe these precautions when replacing the battery:
A.
Remove all watches, rings or other metal objects.
B.
Only use tools with insulated handles.
C.
Do not lay tools or metal parts on top of battery or any terminals.
D.
Wear protective eye wear (goggles), rubber gloves, and boots.
E.
Disconnect the charging source before connecting or disconnecting the battery terminals.
F.
Determine if the battery is inadvertently grounded. If inadvertently grounded, remove the source of the
ground. Contact with a grounded battery can result in electrical shock! The likelihood of such shock will
be reduced if such grounds are removed during installation and maintenance (applicable to a UPS and
a remote battery supply not having a grounded circuit).
