iControl Manual
16
Device Commands
Command
Description
Admin
Fact Def
get devices / get all / get outlets
This command displays a list of connected devices, and their current
status.
No
get device <#1
‐
#16/devname>
Get device information. Displays the device name, and all outlet
names and current status.
Yes
iControl
set device <#1
‐
#16 > name <name>
Set the name of the selected iControl. 20 characters max.
get cycle
Get or set the cycle time in seconds.
No
10
set cycle <1
‐
99>
get delay
Get or set the delay time in seconds.
No
1
set delay <1
‐
99>
get power
Get the current power draw and energy used since the last counter
reset. The energy counter can be reset via SCU or web page, and will
also reset after a reboot.
get current
Get the measured current of the local iControl.
Yes
get device <#1
‐
#16/devname> current
Get the measured current of the selected iControl.
get current alarm
High and Low alarms are used to monitor current conditions and send
an alert by email, SNMP and syslog when the high or low thresholds
are exceeded.
From 0.0 to 10.0/15.0/20.0 (depending on max current for device) in
0.1 amp increments.
Yes
Highalarm:
15.0 for 15
Amp Models
20.0 for 20
Amp Models
Lowalarm:
0.0 Amp
get device <#1
‐
#16/devname> current alarm
set main a hcalarm <nn.n>
set device <#1
‐
#16/devname> main a
hcalarm <nn.n>
set main a lcalarm <nn.n>
set device <#1
‐
#16/devname> main a
lcalarm <nn.n>
