
User Manual
© 2016 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com
4
II
. SETUP AND CONFIGURATION:
1. IP Settings and Configuration
a. Factory Default: Acquires IP address automatically via DHCP
b. Determine assigned IP address by one of the following methods:
i
Access router table
ii
Download and run ESP RP-IP Discover Utility available on the Downloads tab here:
http://espsurgex.com/product/remote-portal/
iii
Download and install Lantronix DeviceInstaller:
http://www.lantronix.com/device-networking/utilities-tools/device-installer.html
2. LAN Operation and Configuration
a. Using a web browser with JavaScript enabled, navigate to
http://IPAddress/config
where the
IPAddress is the IP Address of the RP-IP.
i
When prompted for a User Name and Password, leave both fields blank and press
Log In
.
ii
Important: For any changes to be applied, press the
OK
button at the bottom of the
section, then press
Apply Settings
in the left hand menu, and finally wait for the
RP-IP to reboot with new settings in place.
iii
Home Page: View firmware and configuration information currently in use.