
User Manual
© 2016 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com
3
I.
HARDWARE:
1. RP-IP
a. LAN: Connect to local network using Cat5e patch cable
b. XG / EV Data Port: Connect to XG or EV product using 6p6c
RJ25 patch cable with Standard pin out
c. Power: Input power connection. USB Mini B, 5VDC, 500mA
minimum
d. LEDs:
LED State
Meaning
EV, XG Toggle
Establishing network connectivity
EV solid, XG off
enVision operating mode
XG solid, EV off
Next Gen operating mode
e. Buttons:
Button
Action
Reset
Press and hold for 5 seconds, then release to reset the unit to factory defaults. Will reset IP
settings to factory default.
Mode
Press and hold for 5 seconds, then release to toggle between EV and XG operating modes
2. RP-IP-GNS
a. LAN: Connect to local network using Cat5e patch cable
b. XG / EV Data Port: Connect to XG or EV product using
6p6c RJ25 patch cable with Standard pin out
c. Power: Input power connection. Barrel, 12VDC, 1A
minimum
d. LEDs:
LED State
Meaning
EV, XG Toggle
Establishing network connectivity
EV solid, XG off
enVision operating mode
XG solid, EV off
Next Gen operating mode
Switch Status
Link/Activity LEDs for each switch
port
Power
RP-IP-GNS Power Indicator
e. Buttons:
Button
Action
Reset
Press and hold for 5 seconds, then release to reset the unit to factory defaults. Will reset IP
settings to factory default.
Mode
Press and hold for 5 seconds, then release to toggle between EV and XG operating modes