2
www.surfacemaxx.com
3. When finished, shut off pressure washer. Relieve any pressure left in the line by pulling trigger on pressure
washer gun. Remove the foam cannon from the quick connect fitting.
1. To clean foam cannon, take the sprayer (without
the bottle) and hook it back up to pressure washer
gun or wand. Place intake tube into a bucket of
clean water. Turn on pressure washer and run
clean water through the sprayer.
TWO YEARS LIMITED WARRANTY
Printed in China
The manufacturer warrants this product against defects in materials and workmanship for two (2) years from
date of purchase. If within this period a product is found to be defective in material or workmanship, the
product must be returned with a copy of the bill of sale as proof of purchase to the manufacturer. This warranty
does not cover the product becoming defective due to misuse, accidental damage, improper handing and/or
installation and specifically excludes liability for direct, incidental or consequential damages. As some states do
not allow exclusions or limitations on how long an implied warranty lasts, the above exclusions and limitations
may not apply to you. This warranty gives you specific rights and you may also have other rights which vary
from state to state. For warranty service, call +1 (866) 870-9930, 9 a.m. - 5 p.m., EST, Monday - Friday.
2. When done, turn off pressure washer, disconnect
sprayer and dry.
4. Remove the sprayer from the bottle. Turn sprayer “counterclockwise” until you can remove it from the bottle.
5. Empty any remaining soap mixture.
CARE AND MAINTENANCE
TROUBLESHOOTING
WARRANTY
OPERATING INSTRUCTIONS
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Connections leak.
1. Inlet plug loose.
1. Retighten fittings.
Low soap output.
1. Too little soap added.
1. Check manufactures recommended.
2. Filter is clogged.
2. Try cleaning the filter.
3. Replace the filter.
2. Bad coupler.
2. Replace coupler.
1
