Surewerx 355008, Operation Manual, Page: 5 / 12

5
Assembly Instructions
1. Remove machine from carton and inspect for any visual damage.
2. Remove parts inside the machine.
3. Lay clean and hard cardboard on floor and lay machine on its lid. (Make sure you
hold cover closed when laying machine on its lid.)
4. Mount four legs on brackets with M6 X 12 Philips head screws and M6 keps nuts.
NOTE: DO NOT TIGHTEN.
5. Place lower shelf between legs with flat surface up and attach to legs
with M6 X 12 Philips head screws and M6 keps nuts.
6. With legs pressed tight against lower shelf, tighten all screws to lower shelf.
7. Tighten all the screws installed in step 4.
8. Stand machine up, be careful to hold lid closed.
9. Put work shelf and basket into the machine.
10. Mount pump assembly into slot on the side of the tank and fasten to the tank using the two Philips
head screws installed in the flange on the lower part of the switch housing, then place filter screen in
position.
11. Plug machine into 115 volt 60 Hz GFCI protected outlet.
12. Fill with no more than 22 gallons (83 litres) of cleaning fluid.
13. Turn switch on. Fluid should now be flowing from the flexible spigot.