AC2-GP Multi-Sweetener Dispenser
•
SureShot Technical Assistance Center: 1-888-777-9990 or 902-865-9602
16
Target Adjust
Dispense amounts may be changed for each size and product. Amounts have been pre-
set to your organizations specifications. Once in the Target Adjust page:
1. Select the appropriate Amount button.
2. Press the
Adjustment Up or
Adjustment Down button to desired amount
(measured in grams).
3. Repeat for each Amount button requiring change.
4. To exit Program Mode, press and hold the
Program Mode button until beeps are
heard.
Product
Changing the type of product to be dispensed from a hopper requires changing the
Product setting. In customized option codes, default products have been pre-set to your
organizations specifications.
Note:
The Product setting alters how the equipment dispenses specific products.
Dispense amount settings do not change and must be adjusted separately id required.
See Target Adjust on page 16.
Once in Program Mode:
1. Once in Program Mode, press the
Program Mode button repeatedly until the LCD
displays Product.
2. Select any amount button for the appropriate product hopper.
3. Press the
Adjustment Up or
Adjustment Down button repeatedly until desired
product is displayed.
4. To exit Program Mode press and hold the
Program Mode button until beeps are
heard.
Language
Text in display can be changed between different available languages.
1. Once in Program Mode, press the
Program Mode button repeatedly until the LCD
displays Language.
2. Press the
Adjustment Up or
Adjustment Down button repeatedly until desired
language is displayed.
3. To exit Program Mode press and hold the
Program Mode button until beeps are
heard.
Service
The Service page contains functions that should only be accessed by authorized service
technicians. See Service Manual for more information.
FAULT CONDITION
Hopper Jammed
The dispenser has the ability to detect and report on an electronics over-heat condition,
which can occur if either dispensing motor is unable to rotate freely during a dispense
cycle. This condition can occur if the auger becomes stuck. It should be noted that the
auger can become stuck if the auger/hopper assembly is not completely dry when filled
with product. In this case, the product can dissolve and re-harden, sticking the auger to
the hopper.
Summary of Contents for AC2-GP
Page 1: ...AC2 GP Multi Sweetener Dispenser Operations Manual D 19 090RevL...
Page 2: ......
Page 4: ......
