5
Buttons & lights
The sensors on your Sealed Pet Bowl will react to any physical movement within their range
and are positioned in three separate locations to detect your pet approaching.
To ensure the Pet Bowl functions reliably in your home, the sensors will calibrate to their
new surroundings when the product is turned on -
see page 4
. The sensors will also need to
recalibrate any time the Pet Bowl is moved. Therefore, after moving, the lid may stay open for
a bit longer than normal, but it will sort itself out again once the sensors have readjusted to
their surroundings.
We don’t recommend positioning the Pet Bowl in a location where the sensors are constantly
activated, for example under a low surface, or with one side up against a wall, as this could
affect the sensor calibration -
see page 8.
All of the Pet Bowl’s buttons and lights can be found towards the rear of the product:
Training button
- used to teach
your pet how to use the Pet Bowl.
Illuminates orange.
See page 9.
Battery light
- this light will
flash red when the batteries
are running low.
Power switch
- slide right to turn on
and left to turn off. When you turn the
product off the lid will close.
Manual Open / Close button
- allows
you to override the sensors so you can
keep the lid open. It will illuminate
white when activated.
Sensors
Sensor tips & tricks
