3-4
Switch to Switch (Other Devices)
The Switch can be connected to another switch or other devices (routers, bridges, etc.)
via a twisted-pair category 3, 4, 5 UTP/STP straight or crossover cable.
Figure 3-4 Switch to Switch Connection
± µ
P.4-1
Using straight cable
When using straight cable, this is done from the Uplink port of the Switch (Switch A)
to any of the 10Mbps or 100Mbps (MDI-X) port of the other switch (switch B) or
other devices.
Using crossover cable
When using crossover cable, this is done from any port of the Switch (Switch A) to
any of the 10Mbps or 100Mbps (MDI-X) port of the other switch (switch B) or other
devices (see Figure 3-4).
Switch A LED indicators for the respective connected ports are as follows:
Link/Act is ON.
FDX/Col depends on the connected switch or other device.
100M is ON for 100BASE-T, otherwise OFF.
All manuals and user guides at all-guides.com
