12
Installing Your Hardware
Step 4. Install the Signal Booster
1. Select a location close to a working AC outlet. Do not expose the signal booster to
excessive heat, direct sunlight, moisture, and airtight enclosures.
2. If you’d like to mount the booster to a wall, mark location of screw tabs on the wall in
the desired location
3. Use supplied screws or appropriate screws for surface of mounting location and drill
through screw tab holes on booster.
4. Connect the outside antenna cable to the signal booster connector marked
OUTSIDE
.
Hand-tighten the connection.
5. Connect the inside antenna cable to the signal booster connector marked
INSIDE.
Hand-tighten the connection.
6. Connect the AC power cord to the signal booster.
7. Connect the plug on the other end of the 110V AC power outlet.
8. Turn the booster’s power switch on.
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
