SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
11
Amplifier gain Min. separation (ad)
Installing Your Hardware
Step 3: Attach the
N-Female
connection from the interior antenna to the cable leading
to the connector labeled
INSIDE,
on your booster.
Step 4: Tighten fixing nut to secure antenna (do not over-tighten).
• Storage and transportation: Store and place in non-extreme room-temperature
and dry environment
• Attention: This antenna should not be used near open fire or flame
The SC-222W multi-band plastic antenna is an omni-directional interior antenna
that gathers signals from all sides. Range of antenna is dependent on three factors:
1) physical obstructions, 2) power generated by booster and 3) reception from
outside signal received and distributed by outside antenna.
Besides the antenna itself, parts include mounting
equipment for either a flat horizontal surface or a
wall. It should be mounted in an upright position
for best results. You can also install your interior
antenna above the ceiling panel provided your
ceiling isn’t made of a material that could obstruct
signals from the booster.
Step 1: Drill a 35mm diameter hole in the ceiling. The ceiling
thickness should be 20mm, maximum.
Step 2: Unscrew fixing nut from antenna. Place antenna cable
through hole. Screw the fixing nut back onto antenna
and cable on crawl space side of ceiling and fasten.
