SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
6
BEFORE INSTALLATION
1. Prior to securing the location of any booster parts, a “soft install” is recommended as adjustments may be
needed to optimize performance.
2. Ensure adequate separation between the planned locations of the inside and outside antenna – at least 25
ft (see diagram
”Antenna Separation” on page 7
).
3. For kits that use directional antennas (outside or inside), the directional antenna(s) should be oriented in a
way that they do not “face” the other antenna (see “Aiming
Directional Antennas”
Diagram).
4. Ensure sufficient cable length between the outside antenna location and booster
location. The length of the provided cable is 50 ft.
Installation Overview
Step 1. Find the outside area with the strongest signal.
Step 2. Install the outside antenna identified in step 1.
Step 3. Install the Inside antenna and booster.
Step 4. Connect power source and turn on.
Step 5. Configure gain settings if needed.
INSTALLATION
Step 1. Find the Area With the Strongest Signal
Using your phone, identify the outside location with the strongest signal for placement of your outside antenna.
Generally, this is found above the roofline on the side facing your nearest cell tower and as high as possible
– where the antenna can ‘see’ your cell tower. To find the location of your carrier’s closest cell tower, go to
www.antennasearch.com.
The coverage area that the booster provides is directly related to the strength of incoming signal received
by the outdoor antenna. Mounting the outside antenna where the signal is the strongest will provide the
best results.
Please note,
as seen in the table below, if signal is extremely weak where the outside antenna is
installed, indoor coverage will be limited.
Estimated coverage:
Outdoor signal strength
(dB)
1-2 Bars
(-85 to -95)
3-4 Bars
(-75 to -84)
5 Bars
(-65 to -74)
Fusion4Home Omni/Whip Kit
Estimated coverage (sq. ft.)
500
1000
2,000
Fusion4Home Yagi/Whip Kit
Estimated coverage (sq. ft.)
1000
2,000
4,000
Fusion4Home Yagi/Panel Kit
Estimated coverage (sq. ft.)
1,500
3,000
6,000
Before Installation
OK
Aiming Directional
Antennas
