SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
7
Installing Your Hardware
Note:
Where you install your booster in relation to the carrier’s cell phone tower also determines signal strength. Although cell phone
carriers try to place towers for maximum coverage, local ordinances and terrain features can restrict tower locations, which can limit signal strength at your location.
Cell
Tower
-50dB
-60dB
-70dB
-80dB
-90dB
-100dB
-110dB
Excellent
Good
Poor
Step 2. Install the Signal Booster
1. Select a location close to a working AC outlet, noting that the back of the booster should be pointed in
the direction of the nearest cell tower (Go to www.antennasearch.com for information.). Do not expose the
signal booster to excessive heat, direct sunlight, moisture, and airtight enclosures.
2. Choose the appropriate installation method for your application (either the supplied window sill stand or
mounting tape if no window sill is present).
3. Connect the inside antenna cable to the signal booster. Hand-tighten the connection.
4. Connect the AC power cord to the signal booster.
5. Connect the plug on the other end of the 110V AC power outlet.
