background image

14

Please photocopy and return registration along with proof of purchase 

within 14 days of purchase to:

Sure Heat Mfg. 

3130 Moon Station Road

Kennesaw, GA 30144

Attention: Warranty Registration

If you have other questions, please contact our Customer Service Hotline

(800) 229-5647

8/07

RMH-130-00623

LIMITED LIFETIME WARRANTY

Limited Lifetime Warranty shall apply to the original purchaser at the original installation point only

All logs are guaranteed for the lifetime of the original purchaser against destruction by fire or heat.

The burner assembly system is guaranteed for a period of three (3) years from the date of purchase and will be

repaired or replaced for freight costs only.  Valves, thermocouples, and ODS pilot assemblies are warranted for a

period of one year.

General Warranty:

This warranty does not apply in the case of improper installation, neglect, accident, misuse or

as a result of modifications of the original product.

All costs for removal and reinstallation are the expressed responsibility of the purchaser.

For repair or replacement of a defective part or parts, contact our customer service department at 1-800-229-5647.

You will be asked to provide valid warranty registration, proof of purchase and model number.

It is agreed that any repair or replacement is the exclusive remedy from Sure Heat Manufacturing. In no case shall

Sure Heat be liable for any consequential damage for breach of this or any other warranty expressed or implied

whatsoever. This limitation as to consequential damages shall not apply in states where prohibited.

Purchased From: ______________________________________________Date: __________________________

Size:

o

18”

o

24”/21”

o

30”   Model:

Name ______________________________________Date:____________Phone (        ) __________________
Address ____________________________________________________________________________________
City  ________________________________________State ____________Zip __________________________
E-mail______________________________________________________________________________________

Summary of Contents for SCVFMR 21
















Reviews: