1
EN
Welcome to your new Feeder
What’s in the box?
1
Microchip
Pet Feeder
(MPF001)
2
Single Grey
Bowl
3
Split Grey
Bowl
4
Grey Mat
5
Sure Petcare
RFID Collar Tag
Product Overview
1
The feeder lid will remain closed at all times until it is opened for food replacement or an
authorised pet approaches to eat.
2
When a pet places its head into the hoop on the front of the feeder, the microchip reader
is activated.
3
If the pet is authorised and allowed to eat, the lid will slide open for them.
4
If an unauthorised pet tries to eat from the feeder when the lid is closed then the lid will
not open.
Fitting the batteries
Turn the Feeder upside down to access the battery compartments.
Always use 4 x good quality 1.5 V LR14 alkaline C cell batteries for best performance.
For all battery safety information see page 2.
Programming the Feeder
1
Press the Add Pet ( ) button found on the rear of the feeder.
2
The lid will open and the light will flash green once every second
.
3
Put some food/treats into the bowl and place the feeder where you would normally feed
your pet.
4
When your pet eats from the bowl and has been learnt, the light will stop flashing and
remain on. When your pet moves away from the feeder the lid will close and the green
light will turn off. Their microchip number is now stored permanently in memory.
Replacing the food
1
Press the open/close button ( ) to open the feeder.
2
Place the filled bowl into the feeder
.
3
Press the open/close ( ) button to close the lid and seal the food.
1
2
3
4
5
