over the comb, with the hair lifted or hold the hair between the fingers to lift it and cut it to
the desired length (see diagrams 5 and 6). Always work from the back of the head. Hair can
be cut shorter gradually by reducing the space between the comb/fingers, and the head.
Comb out trimmed hair and check for uneven strands.
● Finally, use the Taper Lever without an attachment comb for close trimming around the
base of the neck, the sides of the neck and the ears.
● To produce a clean straight line at the sideburns,
reverse the Clipper by turning the reverse side uppermost
(see diagram 7).
● Press the Clipper at right angles to the head, tips of the
blades lightly touching the skin and work downwards.
This way will obtain, as a clean-cut as would be given by a
razor.
-At regular intervals the blade set should be removed and cleaned Brush out hairs from
between the blades with a soft cleaning brush.
-Do not remove the lubricating grease on the plastic components. It is not necessary to
remove the small moving blade from the unit.
-Place a few drops of clipper oil onto tthe blade's gliding surface. Wipe off excess oil.
1. Unit must be off. Hold unit securely in one hand Grip
blade and push with your thumb the top of the blade away
from the unit.
2. Use enough force to move the blade of the retaining
snaps and the blade off the bottom.
3. Pull blade away from the unit. Reverse order to reattach blade.
Cleaning
1.Turn off clipper and detach blades.
2.Use the brush included to remove the accumulated hair from the cutters.
3.Rinse the inside of the cutter and blades. Clean the body of the hair clipper with a damp
cloth or under running water.
