Installation
9
Connecting to Power
•
Use a power adapter that has a DC 12 V (± 10%) specification of with the minimum current of 1,500 mA and has IEC/EN 60950-1 certification. If the
power adapter is shared by other devices, the power adapter should provide a current more than the sum of the power consumption from this
device (1,500 mA) and other devices.
•
Use a separate power supply for Secure I/O 2, electric lock and Xpass S2 respectively. If connecting and using the power supply to these devices
together, the devices may malfunction.
Connecting to a Network
TCP/IP
LAN connection (connecting to a hub)
A normal CAT-5 cable can be used to connect to a hub.
LAN connection (connecting directly to a PC)
Xpass S2 can be connected directly to a PC by using a normal type CAT-5 cable because it supports an automatic MDI/MDIX function.
Xpass S2
PC
Xpass S2
Hub
PC
Note
18 - PWR +VDC
Red
14 - PWR GND
Black (White stripe)
UPS
(Optional)
DC power
Xpass S2
18
14
