suprema X-station, User Manual

Page: 53 / 71

X-Station User Manual
- 53 -
Mode Setup
Mode Operation Setup
Setup the various authentication modes, operation modes, and/or time & attendance triggers for the device. The authentication modes will operate according to the timezone set via BioStar.
1 2 3 4
Press Config on the main screen. Select Mode . Press Operation . Set the desired operation mode of the device.
• Card Only Scan a card for authentication.
• ID/Card+Password Input an ID or scan a card then enter the corresponding password for authentication.
• Face Detection Enable/Disable Face Detection. When enabled, a face must be detected before authorization is granted.
• Dual Requires two consecutive authentications of two different users within 15 seconds before authorization is granted.
• Card Mode Set the card type used on the terminal. (Setting values: Use CSN/Use Data Card/Not Use)
-
CSN Card
: The card CSN (Card Serial Number) will be used for authentication.
- Data Card : The data stored on the card will be used for authentication.
• Server Matching Enable/Disable Server Matching. To use server matching, the device must be set to server mode. Server matching will use the BioStar DB to perform the matching.
• Matching Timeout Select the duration for which the device will attempt to authenticate the user.
• Private Auth Enables/Disables the private authentication mode.