7
Introduction
LED Indicator
You can check the status of the device by the color of the LED indicator.
Item
LED
Status
POWER
Solid red
Power on
STATUS
Solid green
Connected with the secure session
Solid blue
Disconnected from a master device
Solid pink
Upgrading the firmware
Solid yellow
RS-485 communication error due to different encryption key or OSDP
packet loss
Solid sky blue
Connected without the secure session
Blinking green
Waiting for the final input to reset settings
Solid green
Settings initialization completed
SUPERVISED INPUT (0 - 11) Solid red
Receiving an input signal
RELAY (0, 1)
Solid red
Relay operation
RS-485 TX
Blinking orange
Transmitting RS-485 data
RS-485 RX
Blinking green
Receiving RS-485 data
AUX IN (0, 1)
Solid orange
Receiving an AUX signal
TAMPER
Solid orange
Tamper operation
Installation example
The Input Module provides instant relay behavior by connecting to BioStar 2 for detected inputs in real-time and it
operates a relay or saves logs for detected inputs while it is disconnected from the master device. The Input Module
supports 12 channel supervised input, 2 channel relay, 2 channel AUX input, and 1 channel tamper input to detect
status, such as 1 channel RS-485, disconnection, short, on, or off for networking with the master device.
Fire
Alarm
Emergency
Door Sensor
Input
Input
Input
Input
Relay
Relay
Alarm
RS-485
TCP/IP
Master Device
BioStar 2
Sensor
Sensor
Smoke
Sensor
