BioEntry W
Network Default Setting
In case of forgetting network setting of BioEntry W (TCP/IP or RS-485 setting) during
installation or using BioEntry W, user can initialize network setting (TCP/IP or RS-485
setting) by using DIP SW installed on the back panel of BioEntry W. Please refer to the
figures in below.
How to initialize Network Setting
g
z
1. Turn On BioEntry W power.
z
2. Please push the Switch (Please refer to Fig.1)
2. Please push the Switch (Please refer to Fig.1)
z
3. After turning on BioEntry Plus power, user can modify
TCP/IP or RS-485 setting what user wants.
z
Network Default Setting
z
4 Please modify TCP/IP or RS-485 setting and save it
z
Network Default Setting
- TCP/IP Address : 192.168.0.1
- Not checked “Use Server”
- RS-485 : PC Connection, 115200bps
4. Please modify TCP/IP or RS 485 setting and save it.
z
4. Please make DIP SW #2 “OFF” (Please refer to Fig.2)
z
5 After recycling BioEntry W power please check the
26
Ⓒ
Copyright 2007 Suprema Inc.
z
5. After recycling BioEntry W power, please check the
modified TCP/IP or RS-485 setting.
Summary of Contents for bioentry w
