8
9
2. Point the remote control at your device. Press down and hold the
SET
key and press the de-
vice key (e.g.
TV
) in a short time (less than 3 seconds, otherwise it goes to Auto Search), then
release the both pressed keys.
3. The device key lights up continuously and the remote control is then in setting-up mode.
4. Actuate the
POWER
key (ON/OFF key) about every 1.5 seconds. (If the device being sought
is a video recorder, DVD player, CD player, TUNER, TAPE or AUX, you may press the
PLAY key also.), the device key now flashes, that means it is in Manual Search mode.
5. Once the searched device switches off (or reacts), test the functions of other keys (don’t
press POWER key, in case it goes to next code) on the remote control. If most of them do not
function properly, press the
POWER
key about every 1.5 seconds again to call up the next
code (continues the Manual Search, see step 4-5).
If you feel most of keys on the remote control work good enough, you can save the code by
pressing the device key (e.g.
TV)
to finish the Manual Search.
Note:
The Manual Search will be automatically terminated if no entry within 30 seconds.
Other Functions
A. Display Device Code:
The device code, which has been set up in your new remote control, can be called up as follows:
1. Press the
SET
key and hold it down, now actuate number key “1” to display the 100th
position of 3-digit code. Count the numbers that the LED flashes. If the LED doesn’t flash,
that means the digit is ZERO.
2. Similarly, press the
SET
key and hold it down, at the same time actuate number key “2” to
display the 10th position of 3-digit code.
3. Press the
SET
key and hold it down, at the same time actuate number key “3” to display the
1st position of 3-digit code.
Example for Code 028:
a. Press SET and “1”
LED flashes 0 time, no flashes.
b. Press SET and “2”
LED flashes 2 times.
c. Press SET and “3”
LED flashes 8 times.
Note:
To leave set-up mode, press the device key (e.g. TV). or if you do not actuate any keys within 10 seconds it
will be automatically terminated.
You may set up more than one device on the new remote control. Before you operate your new remote con-
trol normally, please press the requested
device key first
, so the remote control is surely at the proper device
status, otherwise it may control the wrong device which is not your requested.
B. Set up by Auto Search:
If setting up with brand name and codes is unsuccessful, or you can not find your brand name in
the list, you can use the “Auto Search” to establish the correct code for your remote control.
1. Switch on the device that you like to control. If it is a video recorder, insert a video cassette.
2. Point the remote control at your device. Press the
SET
and the device (e.g.
TV
) key simul-
taneously and hold them down for 3 seconds. Then the device key flashes, that means it is in
Auto Search now.
3. The OFF signal is automatically transmitted to the device from the remote control (code
scan). Once the device(e.g. TV) switches off, immediately
press any key
(except SET key)
to stop the Auto Search.
4. Switch the device on again by pressing the „
POWER
“ key. Check the function of the other
keys on the remote control unit. If all the keys do not function (that means you may not stop
the search in time), or most keys’ operation is not good enough, you can start the search again
(see steps 2–4) to find a suitable code.
If most keys function properly, that means your set up is successful, press the device key (e.g.
TV
) again to save the code and finish the set up.
Note:
To abort the Automatic Search, press any key (except set key). The LED lamp will go out and the search is
terminated. If no key pressed within 30 seconds, the search will automatically quit also.
C. Setting up by Manual Search:
If setting up with brand name and codes is unsuccessful, you can also use the “Manual Search” to
find the correct code for operating your device.
1. Switch on the device that you like to control. If it is a video recorder, insert a video cassette.
6.
Check
the function of the keys on remote control. If most keys on your new remote control
do not function correctly, try another 3-digit device code (e.g. 004…) from the list under
the same brand. Repeat steps 3 to 6 until all the basic functions operate correctly.Once you
satisfy the code, that means you have already got correct set up for this device.
