11
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing
the ON/OFF button on the remote control (B) .
Once the power is off, heating elements will
stop working first . The fan will continue working
for up to 90 seconds to dispense residual heat
inside the heater . This is a normal function .
1
C
B
2 . Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the three
heat settings .
Power for High is 1,500 W; Low is 750 W . ECO
mode is an economic energy saving function .
When ECO mode is chosen, the heater will
operate to maintain a constant warm 68°F .
Note: The ECO LED light will only illuminate
when the ECO function is active and the
ambient room temperature falls below
68ºF / 20ºC .
2
C
B
HIGH
LOW
ECO
3 . Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C . Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to the
temperature on the digital display . The heater
will cycle on and off to maintain the desired
room temperature .
To view the ambient temperature press the
ambient temperature button on the control
panel .
Note: To switch between Fahrenheit and
Celsius, press and hold the ambient
temperature button on the control panel
(C) for 5 seconds .
Note: To engage the child lock on the remote (B),
press and hold for 3 seconds . Deactivate
the lock by repeating these steps .
3
C
B
OR
C
B
