2: Front wheel assembly:
Start by putting a metal washer on each side of the front axle. Insert
wheel bushing on front and back of wheel and slide onto axle. Place
a metal washer and lug nut on the axle and tighten with supplied lug
nut wrench until snug. Be sure not to overtighten. Wheels need to
spin freely. Place plastic center cap on and snap into place.
3: Installing Front Support Bracket:
This will require 6 screws. Find the required black front bracket and
install to the front of the car body under carriage.
4: Installation of the seat:
Locate the seat of the vehicle. Make sure the seat belt is not under
the seat. Install the protruding blocks in the rear of the seat into
the corresponding notches in the body of the car. Push down until
seat locks into place.
