The Superpoint is calibrated ( factory adjusted ) in every incorporated scale. The scales are all developed on
the basis of official methods of measuring the moisture content determination in crops compiled by ISTA (
International Seed Testing Association ). The scales are compiled on the basis of samples which represent
the common grown crops in normal conditions. Growth factors which deviates from the natural standards
will have an effect on the electrical characteristics of the crop and it can therefore be necessary to
recalibrate.
Superpoint Settings and Menu’s
The Superpoint has a number of settings that can be reached by doing the following:
1. Turn ON the device
2. Use the arrow-keys to choose between the menu settings
The device has four menus:
MEASURE
The menu MEASURE is used to choose the crop to be tested
BATTERY
This menu will give you an overview of the battery level
CLEAR AVERAGE
This menu is used to clear the average of the average of the last five measurements done.
1
.
Turn on the meter by pressing ON/TEST.
2
. When MEASURE appears in the display use the arrow
keys ⇑ or ⇓
until CLEAR AVERAGE is displayed.
3
. Accept this choice by pressing ON/TEST. OK will appear in the display followed by an automatic return to
MEASURE.
CALIBRATION
The calibration menu is used to recalibrate the meter. Differing growth factors between years and between
varieties can have an effect on the electrical characteristics of the crop and it can therefore be necessary to
recalibrate the meter. See page 8.
Some more valuable information about the moisture
meter
How to clear the calculated average values
1. Turn on the unit by pressing the ON/TEST button. The menu «MEASURE» (choice of crop) will
automatically appear in the display.
Ver 1.1.0
Page 9/12
