Select crop or function
When pressing the ON/TEST the unit will show software version and country code, followed by the level of
the battery and lastly the menu «MEASURE» ( choice of crop ) appears.
If you wish to accept this choice of menu press the ON/TEST button and the desired crop can be selected
by using the arrow keys
⇑
or
⇓
. However, does one wish to return to the menu «MEASURE» press the
ESC/OFF button and use arrow keys
⇑
or
⇓
to cycle through the menus.
Adjusting the Calibration of the Meter
Each scale can, if necessary, be adjusted individually up or down 3,9% by increments of 0.1%.
1. Turn on the unit by pressing the ON/TEST button. The menu « MEASURE»(choice of crop) will
automatically appear on the display.
2. Using the arrow keys or the menu «CALIBRATION» is selected.
3. Accept this menu by pressing the ON/TEST button.
4. By using the arrow keys or one can select the desired crop that is in need of calibration.
5. Accept this choice by pressing the ON/TEST button. The numeric value +0,0 is shown in the display
( factory calibration ).
6. By using the arrow keys or the desired calibration value can be selected. It is possible to adjust in
the range -3,9% to +3,9%.
7. Accept the selected calibration value by pressing the ON/TEST button.
The indicator* will appear at the end of the name of the crop if adjustments are made compared to
factory calibration.
Removing the battery has no effect on the information stored in the tester.
Ver 1.1.0
Page 8/12
