Superpro Settings and Menu´s
The Superpro has a number of settings that can be reached by doing the following:
1. TURN ON DEVICE
2. Use the arrow-keys to choose between the menu settings
The device have five menus:
MEASURE
The menu measure is used to choose the crop to be tested.
BATTERY
This menu will give you an overview of the battery level.
CLEAR AVERAGE
This menu is used to clear the average of the last five measurements done.
1.
Turn on the meter by pressing ON/TEST.
2.
When MEASURE appears in the display use the arrow keys
⇑
or
⇓
until CLEAR AVERAGE is displayed.
3.
Accept this choice by pressing ON/TEST. OK will appear in the display followed by an automatic return to
MEASURE.
CALIBRATION
The calibration menu is used to recalibrate the meter. Differing growth factors between years and between
varieties can have an effect on the electrical characteristics of the crop and it can therefore be necessary to
recalibrate the meter. See page 8.
COUNTRY
This menu is used to select your language.
The device is pre-programmed with eight different languages. German, English, Dutch, French, Spanish,
Swedish, Polish and Italian. Default the device will start up with English language. To select another
language:
1. TURN ON DEVICE Press and hold the Power button “ON/TEST”
( by holding the ON/TEST button backlight in the display will switch on).
2. SELECT the menu ‘COUNTRY’ and press the ON/TEST button
Select the language by using the arrow keys
⇑
or
⇓
and accept the choice by pressing the ON/TEST
button
To select a different menu press the ESC/OFF button to return and use arrow keys
⇑
or
⇓
to cycle
through the options.
Ver 1.1.0
GB
Page 9/13
