20 | P a g e
Remote Operation
After the main unit is switched on, you can operate
the system by using the remote in almost the same
way as with the controls of the main unit.
The remote control operates on one
CR2025 3V
lithium battery (included in the remote). To
activate the remote control, remove the insulator
tab inserted in the battery compartment.
If the remote operation becomes intermittent or
unsatisfactory, replace the original battery with a
new CR2025 3V lithium battery.
1.Press down on the compartment cover, slide out
the battery holder from the remote-control case.
2.Replace the battery making sure the battery is
installed correctly. The remote will not work if
the battery is installed with the wrong polarity.
CAUTION:
1.) Danger of explosion if the battery is replaced
incorrectly.
2.) Replace only with the same or equivalent type
battery.
3.) Insert the battery holder back into the battery
slot.
REMOTE CONTROL RANGE
•
Use the remote controller within an angle of 30°
at the left and right horizontally and over
distances up to about 3 meters starting ahead.
•
Before operating the cassette deck, make sure
the slide Function Switch on the Amplifier
Section is pushed to the tape position.
