16 | P a g e
Cassette Operation
TO PLAY A CASSETTE TAPE
1. Open the Cassette Door by pressing the Cassette
Stop/Eject button (in some cases, you may have
to press the Cassette Stop/Eject button twice
since this button has combined functions).
2. Insert cassette tape into deck A or B door track.
Make sure the full reel is on the left and the
exposed part of the tape faces downward, make
sure the tape inside is not slack or loosely wound.
If it is, insert a pencil into the reel and turn until
the tape is wound up.
3. Close the Cassette Door.
4. Check the position of the Function Switch to
make sure it is in the TAPE position.
5. Press the Cassette Play button.
NOTE: If the Play button pops up, reverse the
tape or press Rewind.
6. Adjust the Volume Control to your listening
preference.
7. To stop the tape, press the Cassette Stop/Eject
button.
8. To remove the cassette, press the Cassette
Stop/Eject button again and the Cassette Door
will open. Unload the cassette tape, reverse it
and re-insert into cassette compartment if you
want to play the other side of the cassette tape.
RELAY PLAY
To play tapes in deck A and then deck B, follow the
steps below.
The Pause button on deck B also activates the Relay
Play function of this set. First press Play button on
deck A, then press Pause button on deck B, then
press Play button on deck B, deck A will play first
and
when it finishes, deck B will start automatically.
When deck B finishes, the set will stop, and the
Power Indicator will be off.
TO COPY CASSETTE TAPES (TAPE DUBBING)
To record from a pre-recorded cassette to a blank
cassette.
1. Slide Function Switch to TAPE position.
