20
/
40
Super Snow
5.Refrigeration line, defrost drain hoses and electrical cables installation
Unit: Refrigeration line
1.Connect the condenser, evaporator, compressor and
stand-by compressor to the corresponding ports as the
drawing.
2.The pipeline can’t be twined, use the strapping tape to fix
it tightly.
3.Use hose clamps to fix the pipes on the front wall to
avoid shaking. The strapping tape require 300mm, also can
increase elegant appearance.
4.The service valve should locate in a place which won’t
shake so can prevent leaking.
5.Ensure the pipe enough length on considering passing
the shaking engine.
6.Keep the pipes away from the engine exhaust pipe,
because the high engine temperature will make the pipes
early aging or burst. If have to pass, please ensure the
distance at least 250mm, also have to use a protection
rubber.
