– 39 –
EN
01A11
SEARCH FUNCTION
TRACK SEARCH
There are three ways to begin playback on an Audio
CD at a specific track.
Using the Number buttons on the remote control
1
Press the Number buttons to enter the
desired Track number.
¡
Playback will start at the selected track.
¡
For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡
To play track 26, press +10, 2, 6.
Using the SEARCH MODE button
1
Press the SEARCH MODE button.
¡
The track search display appears.
2
Within 30 seconds, select a desired track
number using the Number buttons on the
remote control.
¡
For single digits press 0 first, if the total track of the
disc is more than 10 tracks.
¡
Playback will start at the selected track.
Using the SKIP
H G
buttons
During playback, press the SKIP
G
button to move
the next track. Press it repeatedly to skip subsequent
tracks. Press the SKIP
H
button to go back to begin-
ning of the current track. Press it repeatedly to go to
the previous tracks.
¡
If the SKIP button is pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
NOTE
¡
The SKIP
H G
buttons are not available when
playback is stopped.
CD
TITLE / CHAPTER SEARCH
1
Press the SEARCH MODE button once for
the Chapter search, twice for the Title
search during playback.
2
Enter the desired chapter/title number using
the Number buttons on the remote control.
¡
Playback will start at the selected chapter or title.
¡
Press the CLEAR button to erase the incorrect input.
¡
For single digits press 0 first, if the total chapter or
title of the disc is more than 10.
DVD-V
_ /2
TIME SEARCH
1
During playback, press the SEARCH MODE
button three times (CD: twice) to display the
Time Search on the TV screen.
2
Within 30 seconds, enter a desired disc
time using the Number buttons on the
remote control.
¡
Playback will start at the specified time.
¡
Press the CLEAR button to erase the incorrect input.
¡
When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0 - : - -”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
CD
DVD-V
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a
disc.
1
Press the SEARCH MODE button four times
(CD: three times) during playback.
¡
The display screen and Markers will appear on the
TV screen.
2
Press the Arrow button (
s
/
B
) to select 1, 2,
3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “- - -
- : - - : - -” appears in the display.
3
When you reach the desired point, press the
ENTER button.
¡
The Title or Track and elapsed playing time will
appear in the TV screen.
4
To return to the Marker later, press the
SEARCH MODE button four times (CD: three
times) during playback and the Arrow but-
ton (
s
/
B
) to choose the desired marker,
then press the ENTER button.
NOTES
¡
Opening the disc tray or turning off the power or
pressing the SELECT button or selecting AC at step
[2] and pressing the ENTER button will erase all
Markers.
¡
To clear a marker, using the Arrow button (
s
/
B
),
position the cursor on to the marker number to be
cleared and press the CLEAR button.
¡
You can mark up to 10 points.
5
Press the SEARCH MODE or RETURN but-
ton to exit.
CD
DVD-V
T1061UM(P36-51).QX3 04.7.8 3:59 PM Page 39