Superrollo GW240, Assembly Manual

Page: 31 / 60

31
EN
14. Initial commissioning with the help of the installation wizard
i
The wizard automatically guides you through the con-
figuration process for initial commissioning or after a
software reset (see page 47).
With the help of the installation wizard you will be
guided through the first basic settings.
i
Following power failure, the installation
wizard will be started with the resetting of
the date and time.
Restart the installation wizard
As long as the installation wizard is still running,
it can be restarted by pressing the menu button.
Readiness for operation
The superrollo GW240 / GW245 is ready for use
as soon as the installation wizard has finished.
In the main menu you can change your settings
at any time, or add additional settings.
Additional information about configuring
the end points
The end points must be configured for the roller shutters
to stop at the desired upper and lower positions.
It is imperative that both end points are configured,
otherwise malfunctions may occur.
i
If the superrollo GW240 / GW245 is operated
without an end point setting, the drive will
continue to run as long as one of the two
control buttons is actuated.
The automatic functions remain blocked
until the end point setting is configured.