19
EN
7. Safety instructions
◆
If the running time limit is triggered, then the
superrollo GW240 / GW245 must be left for at
least 12 minutes to cool down.
i
According to DIN EN 13659, it is necessary to determine
that the movement conditions for the shutters are main-
tained in accordance with EN 12045.
◆
The displacement must be of at least 40 mm on the
lower edge in the rolled-out position with a force of
150 N in the upwards direction.
◆
In doing so, it must be ensured that the extending
speed of the shutters for the final 0.4 m is less than
0.15 m/s.
i
During the cooling period the superrollo
GW240 / GW245 may not be used and the
temperature is displayed for as long as is
necessary.
◆
Full operational availability is re-established
after approx. one hour.
Only use the superrollo GW240 / GW245 for opening and
closing roller shutters with a permissible belt.
i
Mechanical locks of any kind are not suitable
for automated operation with this device.
7.1 Intended use
Only use the manufacturer's original spare parts.
◆
By doing so, you avoid risk of malfunctions and
damage to your superrollo GW240 / GW245.
◆
As the manufacturer, we provide no guarantee for
the use of third-party components and accept no lia-
bility for consequential damage resulting from such.
◆
All repairs to the superrollo GW240 / GW245 must
be undertaken by authorised customer service
personnel.
i
Summary of Contents for GW240
Page 59: ...59 EN i...
