Supero X9SPV-F, User Manual

Page: 17 / 103

Chapter 1: Introduction
1-5
Jumper Description Default Setting
JPB1 BMC (IPMI) Enable/Disable
Pins 1-2 (Enabled)
JBT1 CMOS Clear
Open (Short pads to clear)
JWD1 Watch Dog Timer
Pins 1-2 (Reset)
JWP1 BIOS Write Protect Pins 1-2 (Enabled)
JPUSB1 USB Wake-up Pins 1-2 (Enabled)
Jumper Descriptions
Connectors/LED Description
LED1 Standby Power LED
LED2
IPMI Heartbeat LED
LED3
Unsupported Memory LED
SLOT1
PCI-E x16 Gen 2 Slot
JL1 Chassis Intrusion Header
JOH1 Overheat LED
USB 0/1, USB 2/3 USB 3.0 Headers
USB 6/7 USB 2.0 Header
USB 4/5, USB 8/9 Backpanel USB Ports
FAN1~4 CPU Fan, System Fan and Auxilliary Fan Headers
T-SGPIO1, T-SGPIO2 Serial General Purpose I/O headers
JPI2C1 JPI2C, PWR supply (I2C) System Management Bus
JF1 Front Panel Control Header
JSD1 DOM (Disk on Module) Power Connector
JTPM1 TPM Header
SP1 Onboard Speaker/Buzzer
JD1 Power LED/Speaker Header
I-SATA1~I-SATA6 SATA Connectors (White connectors: SATA 3, Black: SATA 2)
JPW1 24-Pin ATX Power Connector
DIMMA1, DIMMB1 SODIMM Memory Sockets
COM1, COM2 Serial Port 1 (COM1) on the Backpanel, Serial Port 2 (COM2) Header
IPMI IPMI Port
KB/MOUSE Combination PS/2 Keyboard or Mouse Port
LAN1, LAN2 LAN1, LAN2 Gb Ethernet Ports
LAN3, LAN4 LAN3, LAN4 Gb Ethernet Ports (X9SPV-LN4F only)
VGA VGA Port
JIPMB1 4-pin External BMC I2C Header (for an IPMI card)
CPU1 CPU / Processor
Ports, LEDs, and Connectors