Supero X9SCAA, User Manual

Page: 71 / 87

Chapter 4: AMI BIOS
4-11

Console Redirection Settings (for EMS)
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Out-of-Band-Mgmt Port
Use this feature to select the port for out-of-band management. The options are
COM1 , COM2, COM3, COM4.
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII character set. Select VT100+
to add color and function key support. Select ANSI to use the extended ASCII
character set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are ANSI, VT100, VT100+, and
VT-UTF8 .
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirec-
tion. Make sure that the same speed is used in the host computer and the client
computer. A lower transmission speed may be required for long and busy lines.
The options are 9600, 19200, 57600, and
115200 (bits per second).
Flow Control
This feature allows the user to set the flow control for Console Redirection to
prevent data loss caused by buffer overflow. Send a "Stop" signal to stop send
-
ing data when the receiving buffer is full. Send a "Start" signal to start sending
data when the receiving buffer is empty. The options are
None, Hardware RTS/
CTS, and Software Xon/Xoff.
Data Bits, Parity, Stop Bits
The setting for each of these items is displayed.

Super IO Configuration
Serial Port 1
Select Enabled to enable the onboard serial port. The options are Enabled
and Disabled.
Serial Port 1 Settings
This option specifies the base I/O port address and the Interrupt Request
address of Serial Port . Select Disabled to prevent the serial port from ac-
cessing any system resources. When this option is set to Disabled, the serial
port becomes unavailable.