Supero X9QR7-TF, User Manual

Page: 13 / 119

Chapter 1: Overview
1-5
X9QRi-F/X9QR7-TF/X9QR7-TF-JBOD Jumpers
Jumper
Description Default Setting
JBT1 Clear CMOS See Chapter 2
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Off (Disabled)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 (X9QRi-F) (Note) Gigabit LAN Ports 1/2 Enable Pins 1-2 (Enabled)
JPME1 Management Engine (ME)
Recovery Mode
Pins 1-2 (Normal)
JPME2 Management Engine (ME)
Manufacture Mode
Pins 1-2 (Normal)
JPS1 SAS Enable for SAS 0~3, SAS
4~7 (JS14/JS15)
Pins 1-2 (Enabled)
JPS3 SAS Enable for SASA 0~3,
SASA 4~7 (JS1/JS2)
Pins 1-2 (Enabled)
JPT1 TPM (Trusted Platform) Enable Pins 1-2 (Enabled)
JPTG1 (X9QR7-TF/TF-
JBOD) (See Note)
T_LAN (10G_LAN) Ports Enable Pins 1-2 (Enabled)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
Note:
Jumpers JPL1 and JPTG1 enable or disable onboard ether-
net LAN ports 1/2. Use JPL1 to enable the GLAN ports 1/2 on the
X9QRi-F. Use JPTG1 to enable 10G_LAN ports 1/2 on the X9QR7-
TF/TF-JBOD.
X9QRi-F/X9QR7-TF/X9QR7-TF-JBOD Connectors
Connectors Description
Battery Onboard Battery (For Proper Battery Disposal, Refer to
Chpt.3)
COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header
Fan 1~Fan 4, Fan A~
Fan D)
CPU/System Fan Headers (Fan A: Fan 5, Fan B: Fan 6,
Fan C: Fan7, and Fan D: Fan 8)
I-SATA 0/1 Intel SB SATA 3.0 Connectors 0/1 (Color: White)
I-SATA2~5, 6~9 Intel SB SATA 2.0 Connectors 2~5, 6~9 (Color: Black)
JF1 Front Panel Control Header
JL1 Chassis Intrusion
JIPMB1 4-pin IPMB I
2
C Header (for an IPMI Card)
JPI
2
C1 Power Supply SMBbus I
2
C Header
JTPM1 TPM/Port 80 Header
JPWR1~4 8-Pin SMCI-Proprietary Power Connectors (See Warning
on Pg. 1-6.)