4-24
X9DRT-HF/HIBQF/HIBFF Motherboard User’s Manual
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when
the system event log is full. The options are
Do Nothing
and Erase Immediately.
Customize EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are
Enabled
and Disabled.
Note
: After making changes on a setting, be sure to reboot the system for
the changes to take effect.
BMC Network Configuration
LAN Channel 1
: This feature allows the user to configure the settings for
LAN1 Port.
Update IPMI LAN Configuration
This feature allows the user to decide if the BIOS should configure the IPMI set
-
ting at next system boot. The options are
No
and Yes. If the option is set to Yes,
the user is allow to configure the IPMI settings at next system boot:
Configuration Address Source
This feature allows the user to select the source of the IP address for this com-
puter. If Static is selected, you will need to know the IP address of this computer
and enter it to the system manually in the field. If DHCP is selected, the BIOS
will search for a DHCP (Dynamic Host Configuration Protocol) server in the
network that is attached to and request the next available IP address for this
computer. The options are
DHCP
and Static. The following items are assigned
IP addresses automatically if DHCP is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of
each three-digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address of this computer.
