Supero X9DR7-TF+, User Manual

Page: 93 / 117

Chapter 4: AMI BIOS
4-17
Slot 3 PCI-E 3.0 x16 OPROM, CPU1 Slot 4 PCI-E 3.0 x8 OPROM, CPU2 Slot
5 PCI-E 3.0 x16 OPROM, CPU2 Slot 6 PCI-E 3.0 x 8 OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on a slot specified above. The options are Enabled and Disabled.
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer using a network device. Select FCoE (Fiber Channel over
Ethernet) to use a FCoE Option ROM to boot the computer using a network device.
The options are iSCSI and
PXE , and FCoE.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1 Option ROM~LAN2 Option ROM. This
is to boot the computer using a network device. The default setting for LAN1 Op-
tion ROM is
Enabled , and the default setting for LAN2 Option ROM is Disabled .
Load Onboard SAS Option ROM
Select Enabled to use the onboard SAS Option ROM to boot the computer using
a SAS device. The options are
Enabled and Disabled.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are
Onboard
, and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and
Disabled .

Super IO Configuration
Super IO Chip: This item displays the Super IO chip used in the motherboard.

Serial Port 1 Configuration
Serial Port
Select Enabled to enable a serial port specified by the user. The options are En-
abled and Disabled.
Device Settings