Supero X9DR7-TF+, User Manual

Page: 13 / 117

Chapter 1: Overview
1-5
X9DR7-TF+/X9DRE-TF+ Jumpers
Jumper
Description Default Setting
JBT1 Clear CMOS See Chapter 2
JPB1 BMC Enabled Pins 1-2 (Enabled)
JPG1 VGA Enabled Pins 1-2 (Enabled)
JPL1 10G_LAN1/10G_LAN2 Enable Pins 1-2 (Enabled)
JPME1 Management Engine (ME) Recovery
Mode
Pins 1-2 (Normal)
JPME2 Management Engine (ME)
Manufacture Mode
Pins 1-2 (Normal)
JPS1 SAS Enable (X9DR7-TF+ only) Pins 1-2 (Enabled)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
X9DR7-TF+/X9DRE-TF+ Connectors
Connectors Description
COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header
FAN1-6, FAN A, FAN B CPU/System Fan Headers
JBAT1 Onboard Battery (See Chpt. 3 for Installation/Disposal
Info.)
J17/J18 T-SGPIO (Serial_Link General Purpose I/O) Headers
JD1 Speaker/Power LED Indicator
JF1 Front Panel Control Header
JIPMB1 4-pin External BMC I
2
C Header (for an IPMI Card)
JL1 Chassis Intrusion
JOH1 Overheat LED Indicator
JP6 Clock Power Supply I
2
C Header
JP7 PAT Power Supply I
2
C Header
JPI
2
C1 Power Supply SMBbus I
2
C Header
JPW1 ATX 24-Pin Power Connector (See Warning on Pg. 1-6.)
JPW2/3 12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
JS3 Battery Backup Unit for SAS Devices (for X9DR7-TF+)
JSD1 SATA DOM (Disk on Module) Power Connector
JSTBY1 Standby Power Header
JTPM1 TPM (Trusted Platform Module)/Port 80
LAN1/LAN2 10G-bit Ethernet LAN Ports 1/2
(IPMI) LAN IPMI_Dedicated LAN
(I-)SATA 0/1 Intel APCH SATA 3.0 Connectors 0/1