Chapter 2: Installation
2-5
2-3 Processor and Heatsink Installation
When handling the processor package, avoid placing direct pressure on the label
area of the fan.
Notes
:
•
Always connect the power cord last, and always remove it before adding,
removing, or changing any hardware components. Make sure that you install
the processor into the CPU socket before you install the CPU heatsink.
•
Make sure to install the motherboard into the chassis before you install the
CPU heatsink and heatsink fans.
•
Make sure that the processor wattage (TDP) does not exceed the maximum
rating for the motherboard. Also, check that it is within the rating limits of
the heatsink and chassis to ensure proper cooling and operation. Refer to
the chassis manual for more information.
•
When purchasing a motherboard without a processor pre-installed, make
sure that the CPU socket plastic cap is in place, and none of the CPU socket
pins are bent; otherwise, contact the retailer immediately.
•
Refer to the Motherboard Features section of the manual and our website
for more information on CPU support and updates.
Installing an LGA 1356 Processor
1. Press the socket clip to release the load plate, which covers the CPU socket,
from its locked position.
2. Gently lift the socket clip to open the load plate.
3. Hold the plastic cap at its north and south center edges to remove it from the
CPU socket.
