Supero X9DAL-3, User Manual

Page: 13 / 107

Chapter 1: Overview
1-5
X9DAL-3/X9DAL-i Jumpers
Jumper
Description Default Setting
JBT1
Clear CMOS See Chapter 3
JI 2 C1/JI 2 C2
SMB to PCI-E/PCI Slots Pins 1-2 (Enabled)
JPES Energy Saving Mode Pins 1-2 (Enabled)
JPL1/JPL2 GLAN1/GLAN2 Enable Pins 1-2 (Enabled)
JPME1 Management Engine (ME)
Recovery Mode Pins 1-2 (Normal)
JPUSB1 Back Panel USB Standby
Power Enabled Pins 1-2 (Enabled)
JPUSB2 Front Panel USB Standby
Power Enabled Pins 1-2 (Enabled)
JWD1 Watch Dog Pins 1-2 (Reset)
X9DAL-3/X9DAL-i Connectors
Connectors Description
7.1 HD Audio 8 Channel (7.1) High-Defi nition Back Panel Audio Connector
BT1 Onboard Battery (See Chpt. 4 for Used Battery Disposal)
Buzzer Internal Speaker
COM1/COM2 Back Panel COM Port1/Front Accessible COM2 Header
FAN1~5, FANA CPU/System Fan Headers (Fan4: CPU1 Fan, Fan5: CPU 2 Fan)
I-SATA 0/1 Intel SATA 3.0 Connectors 0/1
I-SATA 2~5 Intel SATA 2.0 Connectors 2~5
I-SAS 0~7 (X9DAL-3 only) Intel SAS 2.0 Connectors 0~7
I-SATA 6~9 (X9DAL-i only) Intel SATA 2.0 Connectors 6~9
J18 Front Panel Audio Header
JD1 Speaker/Power LED Indicator
JF1 Front Panel Control Header
JPI
2
C1 Power Supply SMBbus I
2
C Header
JL1 Chassis Intrusion
JOH1 Overheat LED Header
JPWR1/JPWR2 12V 8-Pin Power Connectors (See Warning on Pg. 2-6.)
JPWR3 ATX 24-Pin Power Connector (See Warning on Pg. 2-6.)
JSD1 SATA DOM (Device On Module) Power Connector
JSPDIF In/ JSPDIF Out SPDIF (Sony/Philips Digital Interface) In/Out Headers
JSTBY1 Standby Header
JTPM1 TPM (Trusted Platform Module)/Port 80
LAN1/2 G-bit Ethernet Ports 1/2