Supero X8ST3-F, User Manual, Page: 98 / 105

B-2
X8ST3-F/X8STE User's Manual Guide
B-2 Installing the Windows OS for Systems without RAID
Functions
Insert Microsoft's Windows XP/2003 Setup CD in the CD Driver, and the system will 1.
start booting up from CD.
Press the <F6> key when the message-" Press F6 if you need to install a third party 2.
SCSI or RAID driver" displays.
When the Windows XP/2003 Setup screen appears, press "S" to specify additional 3.
device(s).
Insert the driver diskette-"ITE RAID XP/2003 Driver for IDE" into Drive A: and 4.
press the <Enter> key.
Press the <Enter> key to proceed with the installation process. (If you need to specify 5.
any additional devices to be installed, do it at this time.) Once all devices are speci-
fied, press the <Enter> key to continue with the installation.
From the Windows XP/2003 Setup screen, press the <Enter> key. The XP/2003 Setup 6.
will automatically load all device files and then continue with the Windows XP/2003
installation.
After the Windows XP/2003 OS Installation is completed, the system will automati- 7.
cally reboot.
Insert the Supermicro Setup CD that came with your motherboard into the CD Drive 8.
during system boot, and the main screen shown on Page C-1 in Appendix C will dis -
play. Follow the instructions given in Appendix C to complete software installation.