4-18
X7SBL-LN1/LN2 User's Manual
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are
Enabled
and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefit from a greater clock rate. The options are
Default
,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novelle and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you might want to change this setting and try
again. A different OS requires a different Bus Master clock rate
.
Onboard LAN 1 and Onboard LAN 2
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and
Disabled
. This will allow the system to boot from the LAN.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are
Enabled and
Disabled
.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefit from a greater clock rate. The options are
Default
,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novelle and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you might want to change this setting and try
again. A different OS requires a different Bus Master clock rate
.
I/O Device Configuration
Access the submenu to make changes to the following settings.
