Supero SuperWorkstation 7046A-HR+, User Manual

Page: 27 / 112

Chapter 3: System Interface
3-1
Chapter 3
System Interface
3-1 Overview
The control panel on the 7046A-HR+/7046A-HR+F has several LEDs and two but-
tons. There are also two LEDs on each SATA drive carrier. These LEDs keep you
constantly informed of the overall status of the system and the activity and health
of speci
fi c components.
3-2 Control Panel Buttons
There are two push-buttons located on the front of the chassis: a power on/off
button and a reset button.
Power
This is the main power button, which is used to apply or turn off the main system
power. Turning off system power with this button removes the main power but keeps
standby power supplied to the system.
Reset
Use the reset button to reboot the system.