Supero SuperWorkstation 7046A-3, User Manual

Page: 51 / 102

Chapter 5: Advanced Serverboard Setup
5-19
Audio Input CD Header
Pin Defi nitions (CD-IN)
Pin# Defi nition
1 Left Stereo Signal
2 Ground
3 Ground
4 Right Stereo Signal
CD and Audio FP
A 4-pin CD header (CD-IN) and an aux-
iliary header (JC2) allow you to use the
onboard sound for audio CD playback.
Connect an audio cable from your CD
drive to the header that fi ts your cable's
connector. Only one header can be
used at any one time. See the table at
right for pin defi nitions.
IEEE 1394 Connection
Connectors CNF1 and CNF2 provide
connectivity for IEEE 1394 (Firewire)
devices. See the tables on the right
for pin defi nitions.
CNF1
Pin Defi nitions
Pin# Defi n. Pin# Defi n
1 PTPA0+ 2 PTPA0-
3 GND 4 GND
5 PTPB0+ 6 PTPB0-
7 PWR 1394 8 PWR 1394
10 ZX
CNF2
Pin Defi nitions
Pin# Defi n. Pin# Defi n
1 PTPA1+ 2 PTPA1-
3 GND 4 GND
5 PTPB1+ 6 PTPB1-
7 PWR 1394 8 PWR 1394
10 ZY
Universal Serial Bus (USB)
The X8DA3/X8DAi features ten
Universal Serial Bus ports (USB
0~3, USB 4/5, USB 6/7 and USB8),
USB0-3 are located on the I/O back
panel. USB Ports 4/5 and USB 6/7 are
headers that may be used to provide
front chassis USB access. USB 8 is
a Type A connector. (USB cables are
not included). See the tables on the
right for pin defi nitions.
Back Panel USB 0~3, 4/5, 6/7
Pin Defi nitions
Pin# Defi nition Pin# Defi nition
1 +5V 5 +5V
2 USB_PN1 6 USB_PN0
3 USB_PP1 7 USB_PP0
4 Ground 8 Ground
Front Panel USB 8
Pin Defi nitions
USB 8, 9, 10
Pin # Defi nition USB 11
Pin # Defi nition
1 +5V 6 +5V
2 USB_PN2 7 USB_PN3
3 USB_PP2 8 USB_PP3
4 Ground 9 Ground
5 No Con-
nection 10 Key