Supero SuperWorkstation 7044A-32, User Manual

Page: 54 / 124

5-20
S
UPER
W
ORKSTATION 7044A-32 User's Manual
GLAN Enable/Disable
Change the setting of jumper JPL1 to
enable or disable the onboard GLAN
ports (GLAN1 and GLAN2). See the
table on the right for jumper settings.
The default setting is enabled.
Audio Enable Jumper
Settings (JPAC)
Pin# Defi nition
1-2 Enabled
2-3 Disabled
Audio Enable/Disable
JPAC enables or disables the AC97
feature. See the table on the right for
jumper settings. The default setting
is enabled.
GLAN Enable/Disable
Jumper Settings (JPL1)
Pin# Defi nition
1-2 Enabled
2-3 Disabled
SAS Controller Enable
Jumper Settings (JPS1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
SAS Controller Enable/
Disable
JPS1 enables or disables the AIC-
9140W SAS controller. See the table
on the right for jumper settings. The
default setting is enabled.
3rd PWR Supply PWR Fault
(J3P)
The system can notify you in the event
of a power supply failure. This feature
available when three power supply units
are installed in the chassis with one act-
ing as a backup. If you only have one
or two power supply units installed, you
should disable JP3 (the default setting)
to prevent false alarms.
3rd PWR Supply PWR Fault
Jumper Settings
Jumper Setting Defi nition
Closed Enabled
Open Disabled